Product Description

TRIO-M system is an unique equipment used for feeding several lines of process with different blends of plastic or natural materials in form of pellets. This gravimetric dosing system belongs to the plastic technologies developed by Engin Plast. These technologies enable the measurement of each single component of the blend.

OPERATION

In TRIO-M the process cycle starts from the preparation of the solution, which is combined to every process line through the gravimetric dosage of plastic pellets, with a sequential weight reading through a balance supported by high-resolution load cells. The weighed materials are successively transported and mixed on the different process lines. A high-performance microprocessor controls the process.

APPLICATION

The TRIO-M is a device composed by a weighing unit which can be installed on the ground, whereas the other mixing units can be installed on the ground or directly on the process line.

ADVANTAGES

  • AUTOMATION, this device permits to automate the entire preparation cycle of the mixtures and to feed a production department.
  • ECONOMIC,  a unique station which feeds more process lines permits to reduce energy consumption, compressed air and space.
  • CONTROL, the real-time control of the consumption of raw material by the TRIO is directly reported on the management of the user.
  • PRECISE, the dosage is constant and indepent from the particle size and from the variations in the behavior of materials during the time

Product Details: 23C – TRIO M – Eng

For more information contact us by clicking here: Contact us

Gallery

If you want complete information about plastic technologies similar to the Gravimetric dosing system TRIO see also:

Gravimetric dosing system – TRIO P: an equipment used to realize homogeneous blends of plastic or natural materials in form of pellets, grinded, fibers, powders. This gravimetric dosing system belongs to the plastic technologies developed by Engin Plast and enables the measurement of each single component of the mixture.

Gravimetric dosing system – TRIO T: an equipment used to realize homogeneous blends of plastic or natural materials in form of granules. This gravimetric dosing system belongs to the plastic technologies developed by Engin Plast and enables the measurement of each single component of the mixture.