Agricolture

Gravimetric dosing system – Trio T

TRIO-T is an equipment used to process homogeneus blends of plastic and natural materials, such as pellets and grinded. This is made possible by the gravimetric dosage of each single component.

OPERATION

In the gravimetric dosing system TRIO-T the operation cycle starts from the gravimetric dosage of the materials with the reading of the weight in a sequential procedure, made by a balance supported by high-resolution load cells. The weighed materials are succesively blended in a mixer specifically studied for guarantee an homogeneus blend suitable for making the next process possible. A high-performance microprocessor controls the process.

APPLICATION

TRIO-T is a versatile equipment which can be directly installed above the process machine in replacement of the feeding hopper, or on the ground to feed other machines.

ADVANTAGES

INTUITIVE, the graphic interface of the control panel enables a quick and practical learning for the user
PRECISE, the dosage is constant, regardless of the particle size and of variations in the behavior of materials during the time
MODULAR, the latest generation electronics enables the alignmentit to each single process machine
ECONOMIC, thanks to the reduction in waste of raw material
COMPACT, the innovative design gives an harmonious aspect maintaining a limited size

Product Details : 23A – TRIO T – Eng

For more information contact us directly by clicking here: Contact us

Gallery

If you want complete information about plastic technologies related to gravimetric dosing developed by Engin Plast see also:

Gravimetric dosing system – TRIO M: an equipment used for feeding more process lines with different mixtures of plastic or natural materials in form of granules. This gravimetric dosing system belongs to the plastic technologies developed by Engin Plast and enables the measurement of each single component of the mixture.

Gravimetric dosing system – TRIO P:  an equipment used to realize homogeneous mixtures of plastic or natural materials in form of granules, grinded, fibers, powders. This gravimetric dosing […]

By |July 3rd, 2013|Categories: ||Comments Off on Gravimetric dosing system – Trio T

Gravimetric dosing system – Trio M

TRIO-M system is an unique equipment used for feeding several lines of process with different blends of plastic or natural materials in form of pellets. This gravimetric dosing system belongs to the plastic technologies developed by Engin Plast. These technologies enable the measurement of each single component of the blend.

OPERATION

In TRIO-M the process cycle starts from the preparation of the solution, which is combined to every process line through the gravimetric dosage of plastic pellets, with a sequential weight reading through a balance supported by high-resolution load cells. The weighed materials are successively transported and mixed on the different process lines. A high-performance microprocessor controls the process.

APPLICATION

The TRIO-M is a device composed by a weighing unit which can be installed on the ground, whereas the other mixing units can be installed on the ground or directly on the process line.

ADVANTAGES

AUTOMATION, this device permits to automate the entire preparation cycle of the mixtures and to feed a production department.
ECONOMIC,  a unique station which feeds more process lines permits to reduce energy consumption, compressed air and space.
CONTROL, the real-time control of the consumption of raw material by the TRIO is directly reported on the management of the user.
PRECISE, the dosage is constant and indepent from the particle size and from the variations in the behavior of materials during the time

Product Details: 23C – TRIO M – Eng

For more information contact us by clicking here: Contact us

Gallery

If you want complete information about plastic technologies similar to the Gravimetric dosing system TRIO see also:

Gravimetric dosing system – TRIO P: an equipment used to realize homogeneous blends of plastic or natural materials in form of pellets, grinded, fibers, powders. This gravimetric dosing system belongs to the plastic technologies developed by Engin Plast and enables the measurement of each single component […]

By |July 3rd, 2013|Categories: ||Comments Off on Gravimetric dosing system – Trio M

Gravimetric dosing system – Trio P

TRIO-P is an equipment used to realize homogeneous blends of plastic or natural materials in the form of pellets, grinded, fibers, powders. This gravimetric dosing system belongs to the plastic technologies developed by Engin Plast. These technologies enable the measurement of each single component of the blend.

OPERATION

In TRIO-P system the operating cycle starts from the gravimetric metering of the materials (plastic, natural fibers, minerals) with the sequential reading of the weight of each component through a balance supported by high-resolution load cells.

The weighed materials are successively mixed in a mixer specifically studied to guarantee an homogenous blend suitable for feeding the next process.

A high performance microprocessor controls the process.

APPLICATION

TRIO-P is a versatile equipment that can be installed directly above the process machine in replacement of the feeding hopper, or on the ground to feed other machines.

ADVANTAGES

INTUITIVE, the graphic interface of the control panel enables a fast and practical learning for the user
PRECISE, the metering is constant and independent from the particle size and from variations in the behavior of the materials over time
MODULAR, the latest generation technology enables the alignment of the system to every process machine
ECONOMIC, thanks to the reduction in waste of raw material
COMPACT, the innovative design gives an harmonious look maintaining a small size

Product details: 23B – TRIO P – Eng

For more information contact us directly by clicking here: Contact us

Gallery

If you want complete information about gravimetric dosing systems similar to TRIO P see also:

Gravimetric dosing system – TRIO M: an equipment used for feeding more process lines with different mixtures of plastic or natural materials in form of granules. This gravimetric dosing system belongs to the plastic technologies developed by Engin Plast and enables the measurement of each single component of the mixture.

Gravimetric dosing system – TRIO T: an […]

By |July 3rd, 2013|Categories: ||Comments Off on Gravimetric dosing system – Trio P

Volumetric dosing unit – DPM 35

The volumetric dosing system DPM 35 belongs to the plastic technologies developed by Engin Plast, it is usually used for feeding process lines with plastic or natural materials in form of grinded or fibers.

OPERATION

In DPM35 the process is characterized by the speed of the two co-rotating helical screw blades which, according to the parameterization of the user, determines the volume of the material required for the continuous feed of the process line. A high-performance microprocessor controls the process.

APPLICATION

DPM35 is directly installed above the process machine.

ADVANTAGES

INTUITIVE, the graphic interface of the control panel enables a fast and practical learning for the user
MODULAR, the latest generation electronics enables the alignment to each single process machine
SAFE, the different anti-clogging solutions combined with the vertical sides of the containment hopper of the material enable a continuous process of poorly flowing materials.
PRECISE, the use of multiple rotating helical screw blades enable a precise dosage

Product details: 27C – DPM35 & DPM2V – Eng
For more information contact us directly by clicking here: Contact us
Gallery

 

If you want complete information about plastic technologies related to volumetric dosing developed by Engin Plast see also:

Volumetric dosing unit – DPP:  this volumetric dosing unit belongs to the plastic technologies developed by Engin Plast. These technologies are commonly used to feed process lines with plastic or natural materials in form of grinded, powders.

Volumetric dosing unit – DPM: volumetric dosing system that belongs to the plastic technologies developed by Engin Plast. They are commonly used to feed process lines with plastic or natural materials in form of granules, pellets. 

Volumetric dosing unit – DPM2V:  an equipment that belongs to the plastic technologies developed by Engin Plast. This type of volumetric dosing systems are used to feed process lines with plastic or natural materials in form […]

By |July 3rd, 2013|Categories: ||Comments Off on Volumetric dosing unit – DPM 35

Volumetric dosing unit – DPM 2V

The volumetric dosing system DPM2V is an equipment which belongs to the plastic technologies developed by Engin Plast. This type of volumetric dosing systems is used to feed the process lines with plastic or natural materials in form of powders.

OPERATION

In DPM2V the process is characterized by the speed of the two co-rotating helical screw blades which determines the volume of material required for the continuous feeding of the process line, according to the parameterization of the user. A high-performance microprocessor controls the process.

APPLICATION

The volumetric dosing systems DPM2V are directly installed above the process machine.

ADVANTAGES

INTUITIVE, the graphic interface of the control panel enables a fast and practical learning for the user.
MODULAR, the latest generation electronics enables the alignment of the equipment to each single process machine
SAFE, the different anti-clogging solutions combined to the co-rotating helical screw blades enable a continuous process of poorly flowing materials
PRECISE, the use of rotating and calibrated helical screw blades enables precise dosages

Product details: 27C – DPM35 & DPM2V – Eng
For more information please contact us directly by clicking here: Contact us 
Gallery

If you want complete information about plastic technologies related to volumetric dosing developed by Engin Plast see also:

Volumetric dosing unit – DPM 35:  this dosing system belongs to the plastic technologies developed by Engin Plast. They are commonly used for feeding process lines with plastic or natural materials in form of grinded or fibers.

Volumetric dosing unit – DPP:  volumetric dosing system that belongs to the plastic technologies developed by Engin Plast, they are commonly used for feeding process lines with plastic or natural materials in form of grinded, powders.

Volumetric dosing unit – DPM:  volumetric dosing system that belongs to the plastic technologies developed by Engin Plast. They are commonly used for feeding process lines with plastic or natural […]

By |July 3rd, 2013|Categories: ||Comments Off on Volumetric dosing unit – DPM 2V

Volumetric dosing unit – DPM

DPM belongs to the plastic technologies developed by Engin Plast. This type of volumetric dosing system is used for feeding process lines with plastic or natural materials in form of pellets and grinded, by dosing them volumetrically.

OPERATION

In the DPM the process is characterized by the speed of the rotating helical screw blade which determines the volume of the material required for the continuous feeding of the process line, according to the parameterization of the user. A high-performance microprocessor controls the process.

APPLICATION

The volumetric dosage systems type DPM are directly installed above the process machine.

ADVANTAGES

INTUITIVE, the graphic interface of the control panel enables a fast and practical learning for the user
MODULAR, latest generation electronics enables the alignment of the equipment with each single process machine
SAFE, the important inlet to the rotating helical screw blade enables to process granules also of abnormal size
PRECISE, the use of multiple rotating and calibrated helical screw blades enables precise dosages
PRACTICAL, the applied devices enable a fast and safe cleaning during production changes

Product details : 27A – DPM – Eng

For more information contact us by clicking here: Contact us

Gallery

If you want complete information about plastic technologies related to volumetric dosing developed by Engin Plast see also:

Volumetric dosing unit – DPP:  equipments which belong to the plastic technologies developed by Engin Plast. This type of volumetric dosing systems is used for feeding process lines with plastic or natural materials in form of powders, grinded.

Volumetric dosing unit – DPM2V:  equipments which belong to the plastic technologies developed by Engin Plast. This type of volumetric dosing systems is used for feeding process lines with plastic or natural materials in form of powders.

Volumetric dosing unit – DPM35: equipments which belong to the plastic technologies developed by Engin Plast, they are commonly used for […]

By |July 3rd, 2013|Categories: ||Comments Off on Volumetric dosing unit – DPM