Grain

Gravimetric dosing system – Micro

MICRO is an equipment used for feeding process lines with pellets of plastic or natural materials. This gravimetric dosage system belongs to the plastic technologies developed by Engin Plast. These technologies enable to measure precisly the material to be dosed.

ADVANTAGES

Precise and reliable measurement, independent from the variations of the features of the materials
Absence of periodical sampling operations
High precison at low load

APPLICATION

MICRO is a gravimetric dosing system with loss weight system. Precise and reliable, is the dosage unit suitable for processing pellets (as master or additives), which impact on the costs of the final product. The dosage system, realized with a screw double step, enables high performances in all productive processes, where the polymeric quantity to be inserted requires high precision.

MICRO is  equipped with an analog load cell which measures in real-time the weight variations of the material. These variations are then processed by the PLC which guides the speed rotation of the screw and realizes the required set point.

The structure is functional to the purpose: MICRO is composed of a plexiglass feeding hopper connected to the aluminium dosing tube which also act as the body of the feeder. These components combined with the simplicity of the new user interface (intuitive and with color graphics), make of the feeder the ideal tool for dosages of precison.

Product Details: 29 – MICRO – Eng

 

By |December 13th, 2013|Categories: ||Comments Off on Gravimetric dosing system – Micro

Forced feed system AF

ADVANTAGES

Blends removal on board machine, quick product changeover, homogeneous blend even with different types of material, elimination of ground in stock, in-line recovery of waste ground.

OPERATION

The forced feed system AF can be accompanied by dosers DPM 15 series (up to the maximum of 4) to achieve the required formulation in addition to the function of forced feeding satisfying, with a compact and efficient solution, the dosing requirements and regular feeding of the extruder in the presence of formulations with granule and high rates of light ground material.

ADVANTAGES by using Master doser.

DMIX/AF mixers can be accompanied by n°2 dosa-master (DPM and DG series) applied to the trunk connected to the extruder (such dosers can be of the volumetric or gravimetric type).

This solution allows to optimize the coloring phase, minimizing the steps of color change and eliminating the step of mixer cleaning, due to the change of master. Moreover, it reduces the risk of de-mixing in case of low percentages of dosage.

 

ADVANTAGE, use in combination with on-line granulator for recovery of waste ground material.
The forced feed system AF accompanied by dosers DPM series, in combination with the Trix granulators allows to organize the recovery line of the ground material waste by reducing the problems relating to storage and enabling the control of the amount of ground material reintroduced into the extrusion line.

 

 

Gallery

 
Product details: 28A – AF – Eng

By |July 3rd, 2013|Categories: ||Comments Off on Forced feed system AF

ASM – ASMT

Pneumatic conveying system ASM-ASMT
OPERATION

The stainless steel body is equipped with an automatic cleaning filter through compressed air.

The entire working cycle is controlled by an electronic card wich provides also a light signaling in case of lack of material.

All models are predisposed for the application of a proportional valve.

Product details: 10 – CP&ASM – Eng

By |July 3rd, 2013|Categories: ||Comments Off on ASM – ASMT

Pneumatic conveying system – CP

OPERATION

Equipped with a three-phase ring blower, a stainless steel body with an automatic cleaning filter through compressed air.

The working cycle is controlled by a PLC which provides also a light signal in case of lack of material.

ADVANTAGES

INTUITIVE, the graphic interface of the control panel enables an easy and practical learning for the user
MODULAR, the electronics of new generation enables the possibility to align it with every kind of process machine
ECONOMIC, thanks to the reduction in waste of raw material and to the elimination of personnel committed to the preparation of the transport.

The pneumatic conveying system type CP belongs to the range of plastic technologies developed by Engin Plast. This type of conveying systems can be combined with other products of Engin Plast:

Product details: 10 – CP&ASM – Eng

For more information contact us directly by clicking here: Contact us

If you want complete information about plastic technologies related to volumetric dosing developed by Engin Plast see also:

Volumetric dosage system – DPP: volumetric dosing system that belongs to the plastic technologies developed by Engin Plast, they are commonly used for feeding process lines with plastic or natural materials in form of grinded, powders.

Volumetric dosage system – DPM: volumetric dosing system that belongs to the plastic technologies developed by Engin Plast, they are commonly used for feeding process lines with plastic or natural materials in form of granules, pelletts.

Gravimetric dosing system – TRIO T: an equipment used to realize homogeneous blends of plastic or natural materials in form of granules and grinded, by dosing volumetrically each single component.

Gravimetric dosing system – TRIO M: an equipment used for feeding more process lines with different mixtures of plastic or natural materials in form of granules. This gravimetric dosage system belongs to the plastic technologies developed by […]

By |July 3rd, 2013|Categories: ||Comments Off on Pneumatic conveying system – CP

Gravimetric dosing system – Trio T

TRIO-T is an equipment used to process homogeneus blends of plastic and natural materials, such as pellets and grinded. This is made possible by the gravimetric dosage of each single component.

OPERATION

In the gravimetric dosing system TRIO-T the operation cycle starts from the gravimetric dosage of the materials with the reading of the weight in a sequential procedure, made by a balance supported by high-resolution load cells. The weighed materials are succesively blended in a mixer specifically studied for guarantee an homogeneus blend suitable for making the next process possible. A high-performance microprocessor controls the process.

APPLICATION

TRIO-T is a versatile equipment which can be directly installed above the process machine in replacement of the feeding hopper, or on the ground to feed other machines.

ADVANTAGES

INTUITIVE, the graphic interface of the control panel enables a quick and practical learning for the user
PRECISE, the dosage is constant, regardless of the particle size and of variations in the behavior of materials during the time
MODULAR, the latest generation electronics enables the alignmentit to each single process machine
ECONOMIC, thanks to the reduction in waste of raw material
COMPACT, the innovative design gives an harmonious aspect maintaining a limited size

Product Details : 23A – TRIO T – Eng

For more information contact us directly by clicking here: Contact us

Gallery

If you want complete information about plastic technologies related to gravimetric dosing developed by Engin Plast see also:

Gravimetric dosing system – TRIO M: an equipment used for feeding more process lines with different mixtures of plastic or natural materials in form of granules. This gravimetric dosing system belongs to the plastic technologies developed by Engin Plast and enables the measurement of each single component of the mixture.

Gravimetric dosing system – TRIO P:  an equipment used to realize homogeneous mixtures of plastic or natural materials in form of granules, grinded, fibers, powders. This gravimetric dosing […]

By |July 3rd, 2013|Categories: ||Comments Off on Gravimetric dosing system – Trio T

Gravimetric dosing system – Trio M

TRIO-M system is an unique equipment used for feeding several lines of process with different blends of plastic or natural materials in form of pellets. This gravimetric dosing system belongs to the plastic technologies developed by Engin Plast. These technologies enable the measurement of each single component of the blend.

OPERATION

In TRIO-M the process cycle starts from the preparation of the solution, which is combined to every process line through the gravimetric dosage of plastic pellets, with a sequential weight reading through a balance supported by high-resolution load cells. The weighed materials are successively transported and mixed on the different process lines. A high-performance microprocessor controls the process.

APPLICATION

The TRIO-M is a device composed by a weighing unit which can be installed on the ground, whereas the other mixing units can be installed on the ground or directly on the process line.

ADVANTAGES

AUTOMATION, this device permits to automate the entire preparation cycle of the mixtures and to feed a production department.
ECONOMIC,  a unique station which feeds more process lines permits to reduce energy consumption, compressed air and space.
CONTROL, the real-time control of the consumption of raw material by the TRIO is directly reported on the management of the user.
PRECISE, the dosage is constant and indepent from the particle size and from the variations in the behavior of materials during the time

Product Details: 23C – TRIO M – Eng

For more information contact us by clicking here: Contact us

Gallery

If you want complete information about plastic technologies similar to the Gravimetric dosing system TRIO see also:

Gravimetric dosing system – TRIO P: an equipment used to realize homogeneous blends of plastic or natural materials in form of pellets, grinded, fibers, powders. This gravimetric dosing system belongs to the plastic technologies developed by Engin Plast and enables the measurement of each single component […]

By |July 3rd, 2013|Categories: ||Comments Off on Gravimetric dosing system – Trio M

Gravimetric dosing unit – CWS 2023

CWS2023 is an equipment used for feeding process lines with plastic or natural materials in the form of granules. This gravimetric dosing system belongs to the plastic technologies developed by Engin Plast. These technologies enables the precise measurement of the material to be dosed.

OPERATION

The gravimetric dosing system CWS 2023 consists of a gravimetric hopper directly applied on the feeding inlet of of the extruder through an appropriate adapter, a pneumatic control shut-off damper, a storage hopper. The sofisticate electronics of control acquires, in real-time, the variation data of the weight of the material in the hopper and of the linear speed of the extruded product. These data, properly processed, determine the rotation speed of the extruder’s screw and the linear speed of the pulling system in order to maintain constant the feature of the extruded material.

APPLICATION

CWS 2023 is directly installed above the process machine.

ADVANTAGES

INTUITIVE, the graphic interface of the control panel enables a fast and practical learning for the user
PRECISE, the dosage is constant, regardless of the particle size and of the variations in the behavior of the materials in the course of time
MODULAR, the latest generation technolgy enables the alignment of the system with each process machine
ECONOMIC, thanks to the reduction in waste of raw material and the thickness gauge control in terms of shot capacity per linear meter of the film
FUNCTIONAL, thanks to the automatic control of the distribution percentage between the layers in case of co-extruded film

Product details: 25 – CWS2023 – Eng

If you want more information contact us directly by clicking here: Contact us

Otherwise for information about products similar to the Gravimetric dosing unit CWS2023 check also:

Gravimetric dosing unit – DG15: an equipment used for feeding process lines with plastic or natural materials in the […]

By |July 3rd, 2013|Categories: ||Comments Off on Gravimetric dosing unit – CWS 2023

Gravimetric dosing unit – DG 15

DG15 is an equipment used to feed process lines with plastic or natural materials in the form of pellets or grinded through gravimetric dosage.

OPERATION

DG15 operation process starts from the gravimetric dosage of material with a continuous reading of the weight through a balance supported by high-resolution load cells. The weighed material feeds directly the next process. A high-performance microprocessor controls the process.

APPLICATION

DG15 is an equipment directly installed on the process machine.

ADVANTAGES

INTUITIVE, the graphic interface of the control panel enables a fast and practical learning for the user
CONSTANT, the metering is constant regardless of the particle size or of the variations of behavior of the materials in the course of time
MODULAR, the latest generation technology enables the alignment to each single process machine
PRECISE, the use of multiple rotating and calibrated helical screw blades enables a precise dosage
ECONOMIC, thanks to the reduction in waste of raw material

Product details: 26B – DG15 – Eng

For more information contact us directly by clicking here: Contact us

Gallery

If you want complete information about plastic technologies developed by Engin Plast see also:

Gravimetric dosing system – DG1SP: an equipment used for feeding more process lines with plastic or natural materials in form of granules, grinded, fibers, powders. This gravimetric dosing system belongs to the plastic technologies developed by Engin Plast and enables the measurement of each single component to be dosed.

Gravimetric dosing system – MICRO: an equipment used for feeding more process lines with plastic or natural materials in form of granules. This gravimetric dosing system belongs to the plastic technologies developed by Engin Plast and enables the measurement of each single component to be dosed.

Gravimetric dosing unit – CWS2023: an equipment used for feeding process lines with plastic or natural materials in form of granules. This gravimetric dosing system belongs to the plastic technologies […]

By |July 3rd, 2013|Categories: ||Comments Off on Gravimetric dosing unit – DG 15

Volumetric dosing unit – DMV

DMV is an equipment which belongs to the plastic technologies developed by Engin Plast. This kind of volumetric dosing systems are used to process homogeneous blends of plastic and natural materials in the form of pellets, grinded, fibers, powders, through the volumetric dosage of each single component.

OPERATION

In the DMV the process cycle starts from the sequential volumetric dosage of the materials. The dosed materials are subsequently mixed in a blender which is specifically studied for guarantee an homogeneous blend suitable for feeding the next process. A high-performance microprocessor controls the process.

APPLICATION

DMV is a versatile equipment that can be installed directly above the process machine in place of the feeding hopper, or on the ground in order to feed other machines.

ADVANTAGES

INTUITIVE, the graphic interface of the control panel enables a fast and practical learning for the user
PRECISE, the use of rotating and calibrated helical screw blades enables precise dosages
PRACTICAL, the applied devices enable a fast and safe cleaning during production changes

Product details: 12C – DMV – Eng
For more information contact us directly by clicking here: Contact us
Otherwise for information about products similar to the Volumetric dosing unit DMV check also:
Volumetric dosing unit DMT: an equipment used to realize homogeneous blends of plastic or natural materials in form of granules and grinded. Volumetric dosage of each single component.
Volumetric dosing unit DMIX : an equipment used to realize homogeneous blends of plastic and natural materials in form of granules and grinded. Volumetric dosage of each single component. 
 

By |July 3rd, 2013|Categories: ||Comments Off on Volumetric dosing unit – DMV

Volumetric dosing unit – DMT

DMT is an equipment which belongs to the plastic technologies developed by Engin Plast. This type of volumetric dosing systems is used to process homogeneous blends of plastic or natural materials in form of pellets and grinded, by dosing volumetrically each single component.

OPERATION

In DMT the process cycle starts from the continuous volumetric dosage of the materials. The dosed materials are subsequently blended in a mixer which is specifically studied for guarantee an homogeneous blend suitable for feeding the next process. A high-performance microprocessor controls the process.

APPLICATION

DMT is a versatile equipment that can be directly installed above the process machine in place of the feeding hopper, or on the ground for feeding the other machines.

ADVANTAGES

INTUITIVE, the graphic interface of the control panel enables a fast and practical learning for the user
PRECISE, the use of rotating and calibrated helical screw blades enables precise dosages
PRACTICAL, the applied devices enable a fast and safe cleaning during production changes

Product Details: 12A – DMT – Eng 

For more information contact us directly by clicking here:  Contact us
Gallery

If you want complete information about plastic technologies related to volumetric dosing developed by Engin Plast see also:

Volumetric dosing unit DMV: an equipment used to realize homogeneous blends of plastic or natural materials in form of granules and grinded. Volumetric dosage of each single component.

Volumetric dosing unit DMIX: an equipment used to realize homogeneous blends of plastic or natural materials in form of granules and grinded. Volumetric dosage of each single component. 
 

By |July 3rd, 2013|Categories: ||Comments Off on Volumetric dosing unit – DMT